Datenblatt-Suchmaschine für elektronische Bauteile |
|
SLG46533 Datenblatt(PDF) 98 Page - Dialog Semiconductor |
|
SLG46533 Datenblatt(HTML) 98 Page - Dialog Semiconductor |
98 / 185 page SLG46533_DS_114 Page 97 of 184 SLG46533 If OSC is powered off (Power Down option is selected; power down input = 1) and Wake and Sleep Output State = High, the ACMP is continuously on If OSC is powered off (Power Down option is selected; power down input = 1) and Wake and Sleep Output State = Low, the ACMP is continuously off Both cases WS function is turned off • Counter Data (Range: 1 - 65535) User can select wake and sleep ratio of the ACMP; counter data = sleep time, one clock = wake time • Q mode - defines the state of WS counter data when Set/Reset signal appears Reset - when active signal appears, the WS counter will reset to zero and High level signal on its output will turn the ACMPs on. When Reset signal goes out, the WS counter will go Low and turn the ACMPs off until the counter counts up to the end Set - when active signal appears, the WS counter will stop and Low level signal on its output will turn the ACMPs off. When Set signal goes out, the WS counter will go on counting and High level signal will turn the ACMPs on while counter is counting up to the end • Edge Select defines the edge for Q mode High level Set/Reset - switches mode Set/Reset when level is High Note: Q mode operates only in case of "High Level Set/Reset" • Wake time selection - time required for wake signal to turn the ACMPs on Normal Wake Time - when WS signal is High, it takes a BG time (100/550 µs) to turn the ACMPs on They will stay on until WS signal is Low again. Wake time is one clock period. It should be longer than BG turn on time and minimal required comparing time of the ACMP Short Wake Time - when WS signal is High, it takes a BG time (100/550 µs) to turn the ACMPs on. They will stay on for 1 µs and turn off regardless of WS signal. The WS signal width does not matter. • Keep - pauses counting while Keep = 1 • Up - reverses counting If Up = 1, CNT is counting up from user selected value to 65535 If Up = 0, CNT is counting down from user selected value to 0 |
Ähnliche Teilenummer - SLG46533 |
|
Ähnliche Beschreibung - SLG46533 |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |