2.5-6.0/5.0-12.0 GHz GaAs MMIC

Active Doubler

Mechanical Drawing

Bias Arrangement

Page 3 of 5

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099

Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com

Characteristic Data and Specifications are subject to change without notice.

©2005 Mimix Broadband, Inc.

Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept

their obligation to be compliant with U.S. Export Laws.

(Note: Engineering designator is 5DBL0644)

Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.

Thickness: 0.110 +/- 0.010 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold

All Bond Pads are 0.200 x 0.100 (0.008 x 0.004).

Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.

Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 1.566 mg.

Bond Pad #1 (RF In)

Bond Pad #2 (Vcc)

Bond Pad #3 (RF Out)

X1002

0.800

(0.031)

1

2

3

0.632

(0.025)

0.300

(0.012)

2.000

(0.079)

0.0

0.0

0.371

(0.015)

Vcc

RF In

RF Out

1

2

3

December 2005 - Rev 08-Dec-05