Datenblatt-Suchmaschine für elektronische Bauteile |
|
AD1984BJCPZ-RL Datenblatt(PDF) 11 Page - Analog Devices |
|
AD1984BJCPZ-RL Datenblatt(HTML) 11 Page - Analog Devices |
11 / 20 page AD1984B Rev. 0 | Page 11 of 20 | February 2008 FILTER/MIC_BIAS VREF _FILT MIC_BIAS-B MIC_BIAS-C MIC_BIAS_IN 5.0 V or 3.3 V 27 28 29 33 O O O I Voltage Reference Filter. Switchable Microphone Bias. For use with Port B (Pins 21, 22). Switchable Microphone Bias. For use with Port C (Pins 23, 24). Both MIC bias pins are capable of High-Z, 0 V, 1.65 V, 3.7 V, and 3.9 V (with 5.0 V on Pin 33), High-Z, 0 V, 1.65 V, 2.86 V, and 3.0 V (with 3.3 V on Pin 33). Source Power for Microphone Bias Boost Circuitry. Connect this pin to 5.0 V via a low-pass filter. When connected this way the AD1984B is capable of providing 3.9 V as a mic bias to all of the mic bias pins (except on Pin 31). If 5 V is not available, connect this pin to 3.3 V (AVDD) via a low-pass filter. POWER AND GROUND DVCORE 1.7 V to 1.9 V or FILTER 1 I/O CAUTION: DO NOT APPLY 3.3 V TO THIS PIN! Filter connection for internal core voltage regulator. If Pin 9 is connected to 3.3 V DVDD, this pin must be connected to filter caps: 10 μF, 1.0 μF and 0.1μF connected in parallel between Pin 1 and DV SS (Pin 7). Direct, filtered 1.7 V to 1.9 V DVDD may be applied to Pin 1 to lower the digital power requirements. Pin 9 MUST be connected to pin 1 in this case. DVIO 3.3 V 3 I Link Digital I/O Voltage Reference. 3.3 V ± 10% DVSS 7 I Digital Supply Return (Ground). DVDD 1.7 V to 1.9 V or 3.3 V 9 I Digital Supply Voltage 3.3 V ± 10%. This is regulated down to DV CORE on Pin 1 to supply the internal digital core internal to the AD1984B. Direct, filtered 1.7 V to 1.9 V DVDD may be applied to Pin 1 to lower the digital power requirements. Pin 9 MUST be connected to Pin 1 in this case. AVDD 3.3 V 25, 38 I CAUTION: DO NOT APPLY 5 V TO THESE PINS! Analog Supply Voltage 3.3 V ONLY. Note: AVDD supplies should be well regulated and filtered as supply noise degrades audio performance. AVSS 26, 42 I Analog Supply Return (Ground). AVSS should be connected to DVSS using a conductive trace under, or close to, the AD1984B. Table 4. Pin Function Descriptions (Continued) Mnemonic Pin No. I/O Description The symbols used in this table are defined as: I = input, O = output, LI = line level input, LO = line level output, HP = output capable of driving headphone load, MIC = input supports microphones with MIC bias and boost amplifier. |
Ähnliche Teilenummer - AD1984BJCPZ-RL |
|
Ähnliche Beschreibung - AD1984BJCPZ-RL |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |