RX113_16 datasheet(25/131 Pages) RENESAS

Teilenummer	RX113

Bauteilbeschribung	32 MHz, 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory

Download	131 Pages

Scroll/Zoom	100%

Hersteller	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

25 / 131 page

R01DS0216EJ0110 Rev.1.10

Page 25 of 131

Mar 31, 2016

RX113 Group

2. CPU

2.1

General-Purpose Registers (R0 to R15)

This CPU has 16 general-purpose registers (R0 to R15). R0 to R15 can be used as data registers or address registers.

R0, a general-purpose register, also functions as the stack pointer (SP). The stack pointer is switched to operate as the

interrupt stack pointer (ISP) or user stack pointer (USP) by the value of the stack pointer select bit (U) in the processor

status word (PSW).

2.2

Control Registers

(1)

Interrupt Stack Pointer (ISP)/User Stack Pointer (USP)

The stack pointer (SP) can be either of two types, the interrupt stack pointer (ISP) or the user stack pointer (USP).

Whether the stack pointer operates as the ISP or USP depends on the value of the stack pointer select bit (U) in the

processor status word (PSW).

Set the ISP or USP to a multiple of 4, as this reduces the numbers of cycles required to execute interrupt sequences and

instructions entailing stack manipulation.

(2)

Interrupt Table Register (INTB)

The interrupt table register (INTB) specifies the address where the relocatable vector table starts.

(3)

Program Counter (PC)

The program counter (PC) indicates the address of the instruction being executed.

(4)

Processor Status Word (PSW)

The processor status word (PSW) indicates the results of instruction execution or the state of the CPU.

(5)

Backup PC (BPC)

The backup PC (BPC) is provided to speed up response to interrupts.

After a fast interrupt has been generated, the contents of the program counter (PC) are saved in the BPC register.

(6)

Backup PSW (BPSW)

The backup PSW (BPSW) is provided to speed up response to interrupts.

After a fast interrupt has been generated, the contents of the processor status word (PSW) are saved in the BPSW. The

allocation of bits in the BPSW corresponds to that in the PSW.

(7)

Fast Interrupt Vector Register (FINTV)

The fast interrupt vector register (FINTV) is provided to speed up response to interrupts.

The FINTV register specifies a branch destination address when a fast interrupt has been generated.

2.3

Register Associated with DSP Instructions

(1)

Accumulator (ACC)

The accumulator (ACC) is a 64-bit register used for DSP instructions. The accumulator is also used for the multiply and

multiply-and-accumulate instructions; EMUL, EMULU, MUL, and RMPA, in which case the prior value in the

accumulator is modified by execution of the instruction.

Use the MVTACHI and MVTACLO instructions for writing to the accumulator. The MVTACHI and MVTACLO

instructions write data to the higher-order 32 bits (bits 63 to 32) and the lower-order 32 bits (bits 31 to 0), respectively.

Use the MVFACHI and MVFACMI instructions for reading data from the accumulator. The MVFACHI and MVFACMI

instructions read data from the higher-order 32 bits (bits 63 to 32) and the middle 32 bits (bits 47 to 16), respectively.

Ähnliche Beschreibung - RX113_16

Hersteller	Teilenummer	Datenblatt	Bauteilbeschribung
Renesas Technology Corp	RX111	1Mb / 127P	32 MHz 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory
	R01DS0190EJ0100	1,012Kb / 110P	32 MHz 32-bit RX MCUs, 50 DMIPS, up to 128 Kbytes of flash memory
	RX111	1,012Kb / 110P	32 MHz 32-bit RX MCUs, 50 DMIPS, up to 128 Kbytes of flash memory
	RX130	1Mb / 116P	32-MHz, 32-bit RX MCUs, 50 DMIPS, up to 128-KB flash memory
	RX210	6Mb / 223P	50-MHz 32-bit RX MCUs, 78 DMIPS, up to 1-MB flash memory,
	RX110	1Mb / 108P	32 MHz 32-bit RX MCUs, 50 DMIPS
	RX110	1Mb / 108P	32 MHz 32-bit RX MCUs, 50 DMIPS up to 128 Kbytes of flash memory, up to 5 comms channels, 12-bit A/D, RTC
	RX231	3Mb / 170P	54-MHz 32-bit RX MCUs, built-in FPU, 88.56 DMIPS, up to 512-KB flash memory
	R5F52108ADFP	782Kb / 92P	50-MHz 32-bit RX MCUs, 78 DMIPS, up to 512-KB flash memory, 12-bit AD, 10-bit DA
	RX230	2Mb / 177P	54-MHz 32-bit RX MCUs, built-in FPU, 88.56 DMIPS, up to 512-KB flash memory

More results

RX113 Datenblatt(PDF) 25 Page - Renesas Technology Corp

RX113 Datenblatt(HTML) 25 Page - Renesas Technology Corp

Ähnliche Teilenummer - RX113_16

Ähnliche Beschreibung - RX113_16

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL