08 | Keysight | M9336A I/Q Arbitrary Waveform Generator - Data Sheet

Technical Specifications

Definitions and Conditions

Specification

Warranted performance. Specifications include guardbands to account for the expected statistical performance distribution, measurement uncertainties,

and changes in performance due to environmental conditions. All specifications apply over the operating environment outlined in “Environmental and

Regulatory” sections of this data sheet. In addition, the following conditions must be met:

– Instrument is within its calibration cycle if calibration is required.

– Instrument has been stored for a minimum of 1 hour within the operating temperature range prior to turn-on and after a 30 minute warm-up period.

- Open a driver session to intialize the power supplies. This can be donen programatically or by opening SFP and connecting to the instruument

Characteristic

A performance parameter that the product is expected to meet before it leaves the factory, but that is not verified in the field and is not covered by the

product warranty. A characteristic includes the same guardbands as a specification.

Typical

Expected performance of an average unit when operated over a 20 to 30 °C temperature range. Typical performance is not warranted. The instrument

must be within its calibration cycle if calibration is required.

Nominal

Nominal describes representative performance that is useful in the application of the product when operated over a 20 to 30 °C temperature range.

Nominal performance is not warranted.

Additional Information

All data are measured from multiple units at room temperature and are representative of product performance within the operating temperature range

unless otherwise noted.

The specifications contained in this document are subject to change.