ACT88320QI-T datasheet(40/50 Pages) ACTIVE-SEMI

Teilenummer	ACT88320QI-T

Bauteilbeschribung	Advanced PMU with Inrush Control and Bypass Switch

Download	50 Pages

Scroll/Zoom	100%

Hersteller	ACTIVE-SEMI [Active-Semi, Inc]

Direct Link	http://www.active-semi.com

Logo

40 / 50 page

ACT88320QI-T

Rev 2.0, 20-Dec-2017

Innovative PowerTM

www.active-semi.com

ActiveSwitcherTM is a trademark of Active-Semi.

40

Hardware Configuration

This CMI is intended to have EXT_EN connected directly to EXT_PG. This configuration effectively gives Buck1 a 2.5ms

turn-on delay from Buck2.

I2C Address

The ACT88320 7-bit I2C address is 0x25h. Use address 0x4Ah when writing and 0x4Bh when reading.

GPIO1 (pin 13) - nRESET

GPIO1 is configured as an open drain nRESET. nRESET goes open drain 60ms after LDO1 goes into regulation.

GPIO2 (pin 14) - EXT_EN

GPIO2 is configured as an open drain EXT_EN. EXT_EN goes high 2.5ms after Buck2 goes into regulation. EXT_EN

can be used to sequence on an external supply. It is intended to be directly connected to EXT_PG to effectively turn on

Buck1 2.5ms after Buck2 turns on.

GPIO3 (pin 12) - nIRQ

GPIO3 is configured as an open drain nIRQ.

GPIO4 (pin 11) – EXT_PG

GPIO4 is configured as an external power good input. EXT_PG is the input trigger for Buck1. It is intended to be

connected directly to EXT_PG to effectively turn on Buck1 2.5ms after Buck2 turns on.

SLEEP MODE

I2C default settings are SLEEP_MODE=0, SLEEP_EN=0, and SLEEP=0. Refer to the SLEEP State paragraph for details

on how to enter SLEEP Mode.

DPSLP MODE

I2C default settings are DPSLP_MODE=1, DPSLP_EN=0, and DPSLP=0. Refer to the DPSLP State paragraph for

details on how to enter DPSLP Mode.

VSYSMON

VSYSMON = 3.0V

Buck1 Voltage Setting

Buck 1 reference voltage is 0.8V. This sets the allowable voltage range between 0.8V and 3.998V in 12.5mV steps.

LDO Voltage Setting

The LDO reference voltage is 0.8V. This sets the allowable voltage range between 0.8V and 3.998V in 12.5mV steps.

Ähnliche Beschreibung - ACT88320QI-T

Hersteller	Teilenummer	Datenblatt	Bauteilbeschribung
Active-Semi, Inc	ACT88326VA	4Mb / 41P	Advanced PMU with Bypass Switch, & Pushbutton Function Rev 1.0, 29-May-2018
Active-Semi, Inc	ACT88325VA	3Mb / 39P	Advanced PMU with 3 Bucks, 2 LDOs and Load Bypass Switch Rev 1.0, 23-May-2018
Texas Instruments	TPS65835	2Mb / 67P	[Old version datasheet] Advanced PMU
Motorola, Inc	MBC13720	704Kb / 16P	Amplifier with Bypass Switch
Active-Semi, Inc	ACT8935	98Kb / 2P	Advanced PMU for SiRF Prima and Atlas IV 05-Nov-10
	ACT8935	710Kb / 46P	Advanced PMU for SiRF PrimaTM and Atlas IVTM Rev 4, 17-Sep-13
	ACT8895	114Kb / 2P	Advanced PMU for SiRF Prima and Atlas IV 29-Nov-10
	ACT8895	119Kb / 3P	Advanced PMU for SiRF PrimaTM and Atlas IVTM 16-Aug-13
M/A-COM Technology Solu...	MAMF-010614	461Kb / 9P	Integrated SPDT Switch and LNA with Bypass Mode
M/A-COM Technology Solu...	MAMF-010614	461Kb / 9P	Integrated SPDT Switch and LNA with Bypass Mode