1

Power Entry Modules with Line Filter

DD12

https://www.schurter.com /PG06

EMC Products

IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole

Screw-on mounting horizontal (version B)

Order required accessories separately

Screw-on mounting vertical (version A)

Snap-in mounting

See below:

Approvals and Compliances

C14

70° C

Description

- Panel mount :

Screw-on from front side

- 4 Functions :

Appliance Inlet Protection class I , Line Switch 2-pole , Fuseholder for

fuse-links 5 x 20 mm 1- or 2-pole , Line filter in standard and medical

version

- V-Lock notch standard

- Quick connect terminals 6.3 x 0.8 mm

Unique Selling Proposition

- Various mounting options

- Attractive flat design

- Switch for highest inrush current

- V-Lock cord retaining

Characteristics

- Ultra-compact design. Ideal for low profile designs

Aluminum case provides good shielding

- All single elements are already wired

- Fuse drawer meets requirements of medical standard IEC/EN 60601-1

- Ideal for application with high transient loads

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request

- Solder terminals

- Fuse drawer 1-pole, plus spare fuse case

- Fuse drawer 2-pole, with shorting bar

- Other rocker marking

- Line switch, illuminated

- Line switch 1-pole

- Medical version M80

- Class X1- and Y1-capacitors for enhanced withstand voltage

References

Alternative: version without line filter DD11

Alternative: version for snap-in mounting KMF

Alternative: version with 2-stage filter DD14

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Landing Page

Technical Data

Ratings IEC

1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz

Ratings UL/CSA

1 - 8 A @ Ta 40 °C / 250 VAC; 60 Hz

Leakage Current

standard < 0.5 mA (250 V / 60 Hz)

medical < 5 µA (250 V / 60 Hz)

Dielectric Strength

> 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE

Test voltage (2 sec)

Allowable Operation Tempe-

rature

-25 °C to 85 °C

Climatic Category

25/085/21 acc. to IEC 60068-1

IP-Protection

from front side IP 40 acc. to IEC 60529

Protection Class

Suitable for appliances with protection

class I acc. to IEC 61140

Terminal

Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S

Screw-on mounting: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 1 mm to 3 mm

Material: Housing

Thermoplastic, black, UL 94V-0

appliance inlet/-outlet

C14 acc. to IEC 60320-1

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I

Fuseholder

1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per

pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Line Switch

Rocker switch 2-pole, non-illuminated,

acc. to IEC 61058-1

Technical Details

Line Filter

Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

MTBF

> 2'000'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals