Datenblatt-Suchmaschine für elektronische Bauteile |
|
SDW30-24D12 Datenblatt(PDF) 1 Page - Artesyn Technologies |
|
SDW30-24D12 Datenblatt(HTML) 1 Page - Artesyn Technologies |
1 / 2 page OUTPUT SPECIFICATIONS Line regulation LL to HL, single outputs ±0.1% LL to HL, dual outputs ±1.0% Load regulation Single outputs ±0.1% Dual outputs (symmetric) ±0.1% Triple (outputs 2 and 3) ±4.0% Cross regulation Duals 2.0% (See Note 1) Triples 5.0% Voltage accuracy ±2.0% Minimum load 3.3V, 5V 120mA max. Single 12V, 15V 70mA max. Duals each output 10% FL Triples, output 1 10% FL Overshoot At start-up 3.0% max. Ripple and noise 20MHz bandwidth 1.0% pk-pk, max. 30mV rms Temperature coefficient ±0.02%/°C Short circuit protection Hiccup mode Indefinite INPUT SPECIFICATIONS Input voltage range 24VDC nominal, FL 10 to 36VDC 48VDC nominal, FL 20 to 72VDC Input current See table Input reflected ripple Singles: 48VDC, FL 12mA 24VDC, FL 300mA 48VDC, FL 150mA Undervoltage lockout Duals and triples: 24V nominal 9.5VDC 48V nominal 19VDC Start-up time 750ms, max. Remote ON/OFF Duals and triples only TTL compatible ON TTL high or open OFF TTL low SDW30 SERIES Single, dual and triple output [ 2 YEAR WARRANTY ] • 4:1 wide input voltage range • 16 models available including 3.3V outputs • Input reflected ripple according to CEPT • Indefinite short circuit protection • EN55022 conducted emissions level B • Designed to meet EN60950 and IEC950 The SDW30 series of DC/DC converters supply up to 30 Watts of output power in a 3 x 2.56 x 0.81 inch package. The series features a 4:1 wide input voltage range which ensures operation on semi-regulated distributed power voltages. Available in standard single, dual and triple outputs, the series also offers 3.3V single output models for low voltage logic applications. The SDW30 series complies with EN60950 for safety and also complies with EN55022 level B conducted emissions. All models feature continuous short circuit protection. The series boasts a high efficiency of typically 85% with tight load and line regulation. The optimized thermal design and the copper case allow operation in ambient temperatures of up to +70°C without derating. The features of the SDW series make these converters ideally suited for on board logic and distributed power systems. SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated PAGE 1 EMC CHARACTERISTICS Conducted emissions EN55022, FCC part 15 Level B Radiated emissions EN55022, FCC part 15 Level B GENERAL SPECIFICATIONS Efficiency 85% typ. Isolation voltage Input/output 1500VDC Isolation capacitance Input/output 1nF Switching frequency Fixed 100kHz typ. Approvals and Designed to meet EN60950 standards IEC950 Case material Black coated, metal case Material flammability UL94V-0 Weight 250g (8.83oz) MTBF MIL-HDBK-217F 300,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -10°C to +70°C (See derating curve) Non-operating -25°C to +95°C Case +95°C max. Derating See derating curve Cooling Free air convection cooled Relative humidity Non-condensing 30% to 95% Altitude Operating 10,000 feet max. Non operating 40,000 feet max. Vibration 5Hz to 500Hz 2.5G rms (approx.) |
Ähnliche Teilenummer - SDW30-24D12 |
|
Ähnliche Beschreibung - SDW30-24D12 |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |