Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.

Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.

MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION

• 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281

www.micropac.com

5/19/06 Rev F

Pg. 4 of 9

53272

Power MOSFET Optocoupler

TYPICAL CHARACTERISTICS

Parameter

Symbol

Test Conditions

Typical Value

Units

Notes

Output Off-Capacitance

f = 1 MHz

145

pF

Output Offset Voltage

2

µV

7

Input Diode Temperature Coefficient

-1.4

mV/°C

Input Capacitance

f = 1 MHz

20

pF

8

Input-Output Capacitance

f = 1 MHz

1.5

pF

5

Input-Output Resistance

t = 60 s

10

13

Ω

5

Notes:

measured at the center of the package bottom.

5. Pins 2 through 3 shorted together and pins 5 through 8 shorted together.

6. This is a momentary withstand test, not an operating condition.

in a stable ambient (free of temperature gradients).

8. Zero-bias capacitance measured between the LED anode and cathode.

CAUTION:

Care should be taken not to exceed the maximum output power dissipation, maximum case temperature, and

maximum junction temperature when repetitively switching loads.