Datenblatt-Suchmaschine für elektronische Bauteile |
|
CDC536 Datenblatt(PDF) 2 Page - Texas Instruments |
|
|
CDC536 Datenblatt(HTML) 2 Page - Texas Instruments |
2 / 12 page CDC536 3.3-V PHASE-LOCK LOOP CLOCK DRIVER WITH 3-STATE OUTPUTS SCAS378F – APRIL 1994 – REVISED OCTOBER 1998 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 description (continued) Because it is based on PLL circuitry, the CDC536 requires a stabilization time to achieve phase lock of the feedback signal to the reference signal. This stabilization time is required following power up and application of a fixed-frequency, fixed-phase signal at CLKIN as well as following any changes to the PLL reference or feedback signals. Such changes occur upon change of the select inputs, enabling the PLL via TEST, and upon enable of all outputs via OE. The CDC536 is characterized for operation from 0 °C to 70°C. detailed description of output configurations The voltage-controlled oscillator (VCO) in the CDC536 has a frequency range of 100 MHz to 200 MHz, twice the operating frequency range of the CDC536 outputs. The output of the VCO is divided by two and by four to provide reference frequencies with a 50% duty cycle of one-half and one-fourth the VCO frequency. The SEL0 and SEL1 inputs determine which of the two signals are buffered to each bank of device outputs. One device output must be externally wired to FBIN to complete the PLL. The VCO operates such that the frequency of this output matches that of the CLKIN signals. In the case that a VCO/2 output is wired to FBIN, the VCO must operate at twice the CLKIN frequency, resulting in device outputs that operate at the same or one-half the CLKIN frequency. If a VCO/4 output is wired to FBIN, the device outputs operate at the same or twice the CLKIN frequency. output configuration A Output configuration A is valid when any output configured as a 1 × frequency output in Table 1 is fed back to the FBIN input. The input frequency range for the CLKIN input is 50 MHz to 100 MHz when using output configuration A. Outputs configured as 1/2 × outputs operate at half the CLKIN frequency, while outputs configured as 1 × outputs operate at the same frequency as the CLKIN input. Table 1. Output Configuration A INPUTS OUTPUTS SEL 1/2 × FREQUENCY 1 × FREQUENCY L None All H 1Yn 2Yn NOTE: n = 1, 2, 3 output configuration B Output configuration B is valid when any output configured as a 1 × frequency output in Table 2 is fed back to FBIN. The input frequency range for the CLKIN input is 25 MHz to 50 MHz when using output configuration B. Outputs configured as 1 × outputs operate at the CLKIN frequency, while outputs configured as 2× outputs operate at double the frequency of the CLKIN input. Table 2. Output Configuration B INPUTS OUTPUTS SEL 1 × FREQUENCY 2 × FREQUENCY L All None H 1Yn 2Yn NOTE: n = 1, 2, 3 |
Ähnliche Teilenummer - CDC536 |
|
Ähnliche Beschreibung - CDC536 |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |