Datenblatt-Suchmaschine für elektronische Bauteile |
|
BAT-12180 Datenblatt(PDF) 1 Page - Gamewell-FCI by Honeywell |
|
BAT-12180 Datenblatt(HTML) 1 Page - Gamewell-FCI by Honeywell |
1 / 4 page GWACC CS-2504 09/01/06 Page 1 of 4 Description Gamewell’s Audio Command Center (GWACC) is a state-of-the-art, single- or dual-circuit (25 watts each) Emer- gency Voice Evacuation Control Panel (EVAC). It is expandable to 50 watts. The GWACC provides the ability to record five field-programmable mes- sages (up to 60 seconds total mes- sage duration) with an integral com- mercial-grade emergency communica- tions microphone or from an external audio source. Significant technological enhancements set the GWACC apart from other EVAC panels — these in- clude full supervision in both active (alarm or music) and standby condi- tions, supervision of amplifier outputs, field wiring, message generator, all tone generators, and the microphone. The integral power supply is capable of charging up to 18 AH batteries, which can be housed in the GWACC cabinet. The GWACC is suitable for use as an adjunct (slave or stand-alone) to most UL- Listed Fire Alarm Control Panels (FACPs). An optional 25 watt, 25 VRMS audio amplifier is available for system expansion to 50 watts (providing dual 25-watt speaker circuits) or as a secondary amplifier in jurisdictions requiring such backup. A 70.7 VRMS converter is also available for independently converting amplifiers to meet retrofit needs. A host of field-programming options, including the capability of five custom mes- sages (fire, tornado, evacuation, hazmat, non-fire, multi-language, etc.) make the GWACC the most versatile voice evacuation system available. Some suit- able applications for the GWACC include schools, auditoriums, dormitories, theatres, restaurants, places of worship, lodging, office buildings, and factories. Standard Features • Integral 25 watt, 25 VRMS audio amplifier with single Style Z (Class A) or Style Y (Class B) speaker circuit (expandable to 50 watts using the ACC-AAM25). • Modular design for max.system flexibility. • Five Command Input Circuits (CMD) are available for activation by an FACP. • Two command input circuits can be field- programmed for activation by a Notification Appliance Circuit (NAC) or contact closure. • Three command input circuits activate on contact closure. • Manual deactivation of speaker zones. • Command inputs allow: – One 60-second message. – Two 30-second messages. – Three 20-second messages. – Four 15-second messages. – Five 12-second messages. • Microphone time-out feature. • Nineteen different system & diagnostic LEDs. • Two Form-C trouble relays (System & AC Power Loss). • Optional equipment: second amplifier; local playback speaker; and remote microphone. • Integral digital message generator with standard, factory-prerecorded emergency evacuation message. • Custom messages are field recordable, without the addition of add-on modules, using the integral microphone or audio input jack. • Digital message may be field-selected for 3, 4, 6, 8, or infinite repeat. • Built-in alert tone generators with steady, slow whoop, high/low, or chime tone capability. • Field-selectable lead-in/trailing tone selection. • Alert tone selection may be field-programmed to conform with ANSI S3.41 Audible Emergency Evacuation Signal (Temporal Pattern), per NFPA. • Speaker zone control via CMD inputs/keypad. • Dual-optically-isolated, trigger input circuits are independently field-programmable for activation by polarity reversal (host FACP NAC) or dry-contact closure. • Zone 1 switch-programmable for All-Call operation. • Integral diagnostic LEDs include: Power, System Trouble, Microphone Trouble, Message Generator Trouble, Tone Generator Trouble, Amplifier Fault, and others. • Independent Form-C trouble relay allows FACP to monitor voice system while in active (alarm) state. • Integral piezo provides local audible indication for troubles. All outputs are power-limited. • Fully supervised in Standby and Active states, including integral microphone, amplifier output, message generator, speaker wiring, and tone generators. • Independent amplifier supervision: current limit, audio level, short circuit protection. • Auxiliary power output provides local power for addressable control modules when used to activate the GWACC. • Compatible with all Gamewell FACPs, as well as other manufacturers’ panels. • Background music capability (requires AHJ approval) with total output power per amplifier reduced to 20 watts. GWACC Audio Command Center Voice Evacuation Control Panel g2504ph1.jpg |
Ähnliche Teilenummer - BAT-12180 |
|
Ähnliche Beschreibung - BAT-12180 |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |