CS2200-OTP

8

DS842F1

4. ARCHITECTURE OVERVIEW

4.1

Delta-Sigma Fractional-N Frequency Synthesizer

The core of the CS2200 is a Delta-Sigma Fractional-N Frequency Synthesizer which has very high-resolu-

tion for Input/Output clock ratios, low phase noise, very wide range of output frequencies and the ability to

quickly tune to a new frequency. In very simplistic terms, the Fractional-N Frequency Synthesizer multiplies

the Timing Reference Clock by the value of N to generate the PLL output clock. The desired output to input

clock ratio is the value of N that is applied to the delta-sigma modulator (see Figure 2).

The analog PLL based frequency synthesizer uses a low-jitter timing reference clock as a time and phase

reference for the internal voltage controlled oscillator (VCO). The phase comparator compares the fraction-

al-N divided clock with the original timing reference and generates a control signal. The control signal is fil-

tered by the internal loop filter to generate the VCO’s control voltage which sets its output frequency. The

delta-sigma modulator modulates the loop integer divide ratio to get the desired fractional ratio between the

reference clock and the VCO output (thus the duty cycle of the modulator sets the fractional value). This

allows the design to be optimized for very fast lock times for a wide range of output frequencies without the

need for external filter components. As with any Fractional-N Frequency Synthesizer the timing reference

clock should be stable and jitter-free.

Figure 2. Delta-Sigma Fractional-N Frequency Synthesizer

Fractional-N

Divider

Timing Reference

Clock

PLL Output

Voltage Controlled

Oscillator

Internal

Loop Filter

Phase

Comparator

N

Delta-Sigma

Modulator