SI7478DP-T1-E3 datasheet(8/12 Pages) VISHAY

Teilenummer	SI7478DP-T1-E3

Bauteilbeschribung	N-Channel 60-V (D-S) MOSFET

Download	12 Pages

Scroll/Zoom	100%

Hersteller	VISHAY [Vishay Siliconix]

Direct Link	http://www.vishay.com

Logo

8 / 12 page

www.vishay.com

2

Document Number 71622

28-Feb-06

Vishay Siliconix

AN821

PowerPAK SO-8 DUAL

The pin arrangement (drain, source, gate pins) and the

pin dimensions of the PowerPAK SO-8 dual are the

same as standard SO-8 dual devices. Therefore, the

PowerPAK device connection pads match directly to

those of the SO-8. As in the single-channel package,

the only exception is the extended drain connection

area. Manufacturers can likewise take immediate

advantage of the PowerPAK SO-8 dual devices by

mounting them to existing SO-8 dual land patterns.

To take the advantage of the dual PowerPAK SO-8’s

thermal performance, the minimum recommended

land pattern can be found in Application Note 826,

Recommended Minimum Pad Patterns With Outline

Drawing Access for Vishay Siliconix MOSFETs. Click

on the PowerPAK 1212-8 dual in the index of this doc-

ument.

The gap between the two drain pads is 24 mils. This

matches the spacing of the two drain pads on the Pow-

erPAK SO-8 dual package.

REFLOW SOLDERING

Vishay Siliconix surface-mount packages meet solder

reflow reliability requirements. Devices are subjected

to solder reflow as a test preconditioning and are then

reliability-tested using temperature cycle, bias humid-

ity, HAST, or pressure pot. The solder reflow tempera-

ture profile used, and the temperatures and time

duration, are shown in Figures 3 and 4.

For the lead (Pb)-free solder profile, see http://

www.vishay.com/doc?73257.

Ramp-Up Rate

+ 6

°C /Second Maximum

Temperature at 155 ± 15

°C

120 Seconds Maximum

Temperature Above 180

°C

70 - 180 Seconds

Maximum Temperature

240 + 5/- 0

°C

Time at Maximum Temperature

20 - 40 Seconds

Ramp-Down Rate

+ 6

°C/Second Maximum

Figure 3. Solder Reflow Temperature Profile

Figure 3. Solder Reflow Temperatures and Time Durations

210 - 220 °C

3 °C(max)

4 °C/s (max)

10 s (max)

183 °C

50 s (max)

Reflow Zone

60 s (min)

Pre-Heating Zone

3 °C(max)

140 - 170 °C

Maximum peak temperature at 240 °C is allowed.

Ähnliche Beschreibung - SI7478DP-T1-E3

Hersteller	Teilenummer	Datenblatt	Bauteilbeschribung
Vishay Siliconix	SI7478DP	231Kb / 5P	N-Channel 60-V (D-S) MOSFET Rev. B, 07-Nov-05
Vishay Siliconix	2N7000KL	73Kb / 4P	N-Channel 60-V (D-S) MOSFET Rev. A, 16-Feb-04
DinTek Semiconductor Co...	DTL9604	246Kb / 8P	N-Channel 60 V (D-S) MOSFET
Bruckewell Technology L...	MSD20N06	566Kb / 5P	N-Channel 60-V (D-S) MOSFET
Bruckewell Technology L...	MSD30N06	702Kb / 8P	N-Channel 60-V (D-S) MOSFET
Vishay Siliconix	SIR664DP	161Kb / 9P	N-Channel 60 V (D-S) MOSFET Rev. A, 13-May-13
Analog Power	AM110N06-08FP	577Kb / 5P	N-Channel 60-V (D-S) MOSFET
Analog Power	AM2362N	311Kb / 5P	N-Channel 60-V (D-S) MOSFET
Vishay Siliconix	SUM50020EL	189Kb / 9P	N-Channel 60 V (D-S) MOSFET Rev. A, 10-Aug-15
Vishay Siliconix	SIS862DN	565Kb / 13P	N-Channel 60 V (D-S) MOSFET Rev. A, 27-May-13
Analog Power	AM7960N	310Kb / 5P	N-Channel 60-V (D-S) MOSFET

More results

SI7478DP-T1-E3 Datenblatt(PDF) 8 Page - Vishay Siliconix

SI7478DP-T1-E3 Datenblatt(HTML) 8 Page - Vishay Siliconix

Ähnliche Teilenummer - SI7478DP-T1-E3

Ähnliche Beschreibung - SI7478DP-T1-E3

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datenblatt Download

Link URL