TMP102EVM Hardware

www.ti.com

3.4

TMP102EVM Features

This section describes some of the hardware features present on the TMP102EVM test board.

3.4.1

I

I

used to monitor the two-wire lines of the I

the use of the SM-USB-DIG.

3.4.2

10-Pin Connector Ribbon Extender (Optional)

The TMP102EVM kit ships with an optional ribbon cable for extending the connection between the

SM-USB-DIG and the PCB. This extension cable can be useful if high temperature tests must be run on

the test board, because the SM-USB-DIG is not rated for high temperatures. To connect the ribbon cable,

attach the cable to the EVM and SM-USB-DIG as shown in Figure 7.

Figure 7. 10-Pin Ribbon Cable Extender

8

TMP102EVM Evaluation Board and Software Tutorial

SBOU114

– August 2011

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated