STANDARD

MICROCIRCUIT DRAWING

SIZE

A

5962-86887

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

REVISION LEVEL

C

SHEET

5

DSCC FORM 2234

APR 97

TABLE I. Electrical performance characteristics – Continued.

Test

Symbol

Conditions

-55

Group A

subgroups

Device

type

Limits

Unit

unless otherwise specified

Min

Max

Gain bandwidth

1/

product

GBW

4

01

5.0

MHz

Power consumption

Each amplifier,

1

01

140

mW

Input offset voltage match

1

01

80

µV

2,3

180

Average noninverting

bias current

1

01

±40

nA

2,3

±60

Noninverting offset current

1

01

±60

nA

2,3

±90

Inverting offset current

1

01

±60

nA

2,3

±90

1/ Guaranteed if not tested.

3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an

approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and

Maritime -VA prior to listing as an approved source of supply shall affirm that the manufacturer's product meets the

requirements of MIL-PRF-38535, appendix A and the requirements herein.

3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided

with each lot of microcircuits delivered to this drawing.

3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that

affects this drawing.

3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritime 's agent, and the acquiring activity retain the

option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made

available onshore at the option of the reviewer.