Datenblatt-Suchmaschine für elektronische Bauteile |
|
ADC10D020 Datenblatt(PDF) 5 Page - Texas Instruments |
|
|
ADC10D020 Datenblatt(HTML) 5 Page - Texas Instruments |
5 / 40 page ADC10D020 www.ti.com SNAS143D – SEPTEMBER 2001 – REVISED MARCH 2013 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) (3) Positive Supply Voltages 3.8V Voltage on Any Pin −0.3V to (VA or VD +0.3V) Input Current at Any Pin (4) ±25 mA Package Input Current (4) ±50 mA Package Dissipation at TA = 25°C See (5) ESD Susceptibility (6) Human Body Model 2500V Machine Model 250V Soldering Temperature, Infrared,10 sec. (7) 235°C Storage Temperature −65°C to +150°C (1) All voltages are measured with respect to GND = AGND = DGND = 0V, unless otherwise specified. (2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. (3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications. (4) When the input voltage at any pin exceeds the power supplies (VIN < GND or VIN > VA or VD), the current at that pin should be limited to 25 mA. The 50 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an input current of 25 mA to two. (5) The absolute maximum junction temperature (TJmax) for this device is 150°C. The maximum allowable power dissipation is dictated by TJmax, the junction-to-ambient thermal resistance (θJA), and the ambient temperature (TA), and can be calculated using the formula PDMAX = (TJmax - TA )/θJA. In the 48-pin TQFP, θJA is 76°C/W, so PDMAX = 1,645 mW at 25°C and 855 mW at the maximum operating ambient temperature of 85°C. Note that the power dissipation of this device under normal operation will typically be about 170 mW (150 mW quiescent power + 20 mW due to 1 LVTTL load on each digital output). The values for maximum power dissipation listed above will be reached only when the ADC10D020 is operated in a severe fault condition (e.g. when input or output pins are driven beyond the power supply voltages, or the power supply polarity is reversed). Obviously, such conditions should always be avoided. (6) Human body model is 100 pF capacitor discharged through a 1.5 k Ω resistor. Machine model is 220 pF discharged through 0Ω. (7) See AN450, “Surface Mounting Methods and Their Effect on Product Reliability”, or the section entitled “Surface Mount” found in any post 1986 Texas Instruments Linear Data Book, for other methods of soldering surface mount devices. Operating Ratings (1) (2) Operating Temperature Range −40°C ≤ TA ≤ +85°C VA, VD Supply Voltage +2.7V to +3.6V VDR Supply Voltage +1.5V to VD VIN Differential Voltage Range GAIN = Low ±VREF/2 GAIN = High ±VREF VCM Input Common Mode Range GAIN = Low VREF/4 to (VA–VREF/4) GAIN = High VREF/2 to (VA–VREF/2) VREF Voltage Range 0.8V to 1.5V Digital Input Pins Voltage Range −0.3V to (VA +0.3V) (1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. (2) All voltages are measured with respect to GND = AGND = DGND = 0V, unless otherwise specified. Copyright © 2001–2013, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Links: ADC10D020 |
Ähnliche Teilenummer - ADC10D020 |
|
Ähnliche Beschreibung - ADC10D020 |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |