Datenblatt-Suchmaschine für elektronische Bauteile |
|
HCPL-523K Datenblatt(PDF) 8 Page - Agilent(Hewlett-Packard) |
|
HCPL-523K Datenblatt(HTML) 8 Page - Agilent(Hewlett-Packard) |
8 / 12 page 8 Notes: 1. Peak Forward Input Current pulse width < 50 µs at 1 KHz maximum repetition rate. 2. Each channel of a multichannel device. 3. Duration of output short circuit time not to exceed 10 ms. 4. All devices are considered two-terminal devices: measured between all input leads or terminals shorted together and all output leads or terminals shorted together. 5. This is a momentary withstand test, not an operating condition. 6. CM L is the maximum rate of rise of the common mode voltage that can be sustained with the output voltage in the logic low state (V O < 0.8 V). CM H is the maximum rate of fall of the common mode voltage that can be sustained with the output voltage in the logic high state (V O > 2.0 V). 7. t PHL propagation delay is measured from the 50% point on the leading edge of the input pulse to the 1.3 V point on the leading edge of the output pulse. The t PLH propagation delay is measured from the 50% point on the trailing edge of the input pulse to the 1.3 V point on the trailing edge of the output pulse. 8. Measured between each input pair shorted together and all output connections for that channel shorted together. 9. Measured between adjacent input pairs shorted together for each multichannel device. 10. Zero-bias capacitance measured between the LED anode and cathode. 11. Standard parts receive 100% testing at 25 °C (Subgroups 1 and 9). SMD, Class H and Class K parts receive 100% testing at 25, 125, and –55 °C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively). 12. Parameters are tested as part of device initial characterization and after design and process changes. Parameters guaranteed to limits specified for all lots not specifically tested. Single Channel Product Only Parameter Symbol Typ. Units Test Conditions Fig. Notes Output Enable Time to Logic High tPZH 30 ns 8 Output Enable Time to Logic Low tPZL 30 ns 8 Output Disable Time from Logic High tPHZ 45 ns 8 Output Disable Time from Logic Low tPLZ 55 ns 8 Dual and Quad Channel Products Only RH = 45%, TA = 25°C, Input-Input Insulation Leakage Current II-I 0.5 nA VI-I = 500 V, t = 5 s 9 Resistance (Input-Input) RI-I 1013 Ω VI-I = 500 V 9 Capacitance (Input-Input) CI-I 1.5 pF f = 1 MH 9 Typical Characteristics (cont’d.) All typical values are at TA = 25°C, VCC = 5 V, IF(ON) = 5 mA, unless otherwise specified. Figure 1. Typical Logic Low Output Voltage vs. Temperature. Figure 2. Typical Logic High Output Current vs. Temperature. |
Ähnliche Teilenummer - HCPL-523K |
|
Ähnliche Beschreibung - HCPL-523K |
|
|
Link URL |
Privatsphäre und Datenschutz |
ALLDATASHEETDE.COM |
War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |