SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine

Wave UPS, Extended Run, SNMP, Webcard

pre-installed, 2U Rack/Tower, LCD, USB, DB9 Serial

MODEL NUMBER: SMART2200RMXLN

Description

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for

critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)

with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels

while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in

exceptionally poor-power environments with two separate levels of voltage boost to correct both slight

undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed

UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover

from line to battery power occurs within milliseconds to maintain operation of connected equipment without

interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network

management interfaces support communications via USB, RS-232 and pre-installed SNMPWEBCARD network

interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown

features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment

load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete

cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select

outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or

tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration

options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

Features

Tripp Lite SMART2200RMXLN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity and extended runtime options

Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V

NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently switched output load banks

Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages

High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions

Highlights

2.2kVA / 2200VA / 1920W line

interactive 2U rack / tower UPS;

0.9 power factor

120V nominal output during

brownouts to 83V and

overvoltages to 145V

Interactive LCD provides UPS

status information and advanced

configuration options

USB, RS232, EPO and

Pre-installed SNMPWEBCARD

interface

Expandable runtime, Hot-swap

batteries, 96% efficiency, Sine

wave output

2 independently switchable

output load banks

NEMA 5-20P input; 4 NEMA

5-15/20R & 4 5-15R outlets

Applications

Distributed Server Rooms

Network Closets

Small Business Networks

Voice over IP (VoIP) Phone

Systems

Package Includes

SMART2200RMXLN UPS

system with Pre-installed

SNMPWEBCARD

PowerAlert software with USB,

Serial & EPO cabling

4 post installation kit

Owner's manual

1 / 5