SN74F126

QUADRUPLE BUS BUFFER GATE

WITH 3-STATE OUTPUTS

SDFS017B – JANUARY 1989 – REVISED NOVEMBER 2002

2

POST OFFICE BOX 655303

logic diagram (positive logic)

4

56

2A

2Y

2OE

1

23

1A

1Y

1OE

10

98

3A

3Y

3OE

13

12

11

4A

4Y

4OE

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–1.2 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input current range

–30 mA to 5 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the disabled or power-off state

–0.5 V to 5.5 V

. . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high state

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Current into any output in the low state

128 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

86

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

N package

80

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NS package

76

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input voltage ratings may be exceeded provided the input current ratings are observed.

2. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions (see Note 3)

MIN

NOM

MAX

UNIT

VCC

Supply voltage

4.5

5

5.5

V

VIH

High-level input voltage

2

V

VIL

Low-level input voltage

0.8

V

IIK

Input clamp current

–18

mA

IOH

High-level output current

–15

mA

IOL

Low-level output current

64

mA

TA

Operating free-air temperature

0

70

°C

NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.