Part Number: XZMOLA109FS

3.5x2.8 mm SMD CHIP LED LAMP

Sep 16, 2016

XDSB8558 V2-Z Layout: Maggie L.

P. 5/6

The device has a single mounting surface.

The device must be mounted according to

the specifications.

Reel Dimension

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

LED is recommended for reflow soldering and

soldering profile is shown below.

Remarks:

If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous intensity / luminous flux: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.

Tape Specification (Units : mm)